Odyssey L4-2.2L SOHC (1995)
Fig. 26 Front Evaporator Core
9. Remove screws and clamps from housings, then separate housings and remove evaporator core, Fig. 26.
10. Reverse procedure to install, noting the following:
a. If installing a new evaporator, add suitable refrigerant oil.
b. Reinstall A/C thermostat sensor to its original location.
c. Replace O-rings with new ones at each fitting and apply a thin coat of refrigerant oil before installing them.
d. Make sure that there is no air leakage.
e. Charge system, and test its performance.
11. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming
procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
