Odyssey L4-2.2L SOHC (1995)
-
Remove the short connector (RED) from the driver's airbag connector, then connect the airbag 3P connector to the cable reel 3P connector.
-
Attach the short connector (RED) to the access panel, then install the panel on the steering wheel.
7. Connect the battery positive cable, then connect the negative cable.
8. After installing the airbag assembly, confirm proper system operation:
-
Turn the ignition switch ON (II): The instrument panel SRS indicator light should come on for about six seconds and then go off.
-
Make sure both horn buttons work.
-
Take a test-drive, and make sure the cruise control switches work.
9. Enter the anti-theft code for the radio, then enter the customer's radio station presets.
