Odyssey L4-2.2L SOHC (1995)
12. Align the cancel sleeve grooves with the cable reel projections.
13. Carefully install the cable reel on the steering column shaft. Then attach the connector holder to the steering column.
14. Install the column covers.
15. If necessary, center the cable reel (New replacement cable reels come, centered.) Do this by first rotating the cable reel clockwise until it stops.
Then rotate it counterclockwise (approximately two turns) until:
-
The yellow gear tooth lines up with the alignment mark on the cover.
-
The arrow mark-on the cable reel label points straight up.
