Odyssey EX L4-2253cc 2.3L SOHC (VTEC) MFI (1998)
6. Installation is the reverse of the removal procedure.
NOTE: Make sure you assemble the center anchor bolt on the center anchor as shown.
Third Seat Belt
Third seat belt removal
1. Removable-type second seat: Remove it through the door opening.
Bench-type second seat: Fold it up.
2. Remove:
-
Rear door sill molding
-
Rear door trim as necessary
-
Lower anchor bolt from second seat belt
-
Rear trim panel
-
Rear side trim panel
3. Remove the upper anchor cover and seat belt guide.
4. With a 17 mm socket or box-end wrench, remove all the anchor bolts, the retractor bolt, and the retractor mounting bolt, then remove the third seat
belt and the retracting portion of it.
5. Installation is the reverse of the removal procedure.