Odyssey EX V6-3.5L (1999)
52. Apply multipurpose grease (A) to the circumference of the rack end joint housing.
53. Apply a light coat of silicone grease to the boot grooves (B) of the rack ends.
54. Center the steering rack within its stroke. Install the boots on the rack ends with the tie-rod clips. After installing the boots, wipe the grease off the
threaded section (A) of the rack end.
55. Install the new boot bands by aligning the tabs (A) with the holes (B) of the band.
56. Close the ear portion (A) of the band with a commercially available pincers, Oetiker 1098 or equivalent (B).
57. Slide the rack right and left to be certain that the boots are not deformed or twisted.
