Passport EX 2WD V6-3.2L DOHC (6VD1) (1998)
/Page-139001.png)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Removal Procedure
NOTE: Care must be taken when handling the engine coolant temperature (ECT) sensor. Damage to the ECT sensor will affect proper operation of the
fuel injection system.
1. Disconnect the negative battery cable.
2. Drain the radiator coolant. Refer to Draining and Refilling Cooling System in Engine Cooling.
3. Disconnect the electrical connector.
4. Remove the ECT sensor from the coolant crossover.
