Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
/Page-1926001.png)
Relay Lever: Service and Repair
TOOL REQUIRED
-
J-36831 Tie Rod End Remover
-
J-22912-01 Relay Lever Remover
PREPARATION: Raise the vehicle and support the frame with suitable safety stands.
REMOVAL
1. Nut and cotter pin. Disconnect relay lever at the center track rod.
2. Bolt and nut. Push the stabilizer bar aside and remove the bolts and nuts.
3. Relay lever and bracket.
4. Nut and washer.
