Passport LX 2WD V6-3.2L DOHC (6VD1) (1998)
/Page-2127004.png)
8.
Remove the front four clips on the left-front inner fender mud flap, then peel back the front of the mud flap to access the A/C compressor.
9.
Push any slack in the coil lead wire away from the coil through the grommet. Then, behind the retaining slot, firmly attach a mini wire tie around
the wire, and cut off the excess wire tie. The wire tie prevents the wire from sliding back through the grommet and contacting the pulley.
10.
Reinstall the inner fender mud flap.
11.
Reinstall the wheel, torque the lug nuts to 118 Nm (87 lb-ft), then lower the vehicle.
