Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Ignition Switch Lock Cylinder: Service and Repair
REMOVAL
1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to "LOCK".
3. Disconnect the battery ground cable, and wait at least 5 minutes.
4. Disconnect the yellow 2-way SRS connector located under the steering column.
CAUTION: The wheels of the vehicle must be straight ahead and the steering column in the "LOCK" position before disconnecting the steering
wheel. Failure to do so will cause the coil assembly to become uncentered which will cause damage to the coil assembly.
5. Remove the engine hood opening lever and steering lower cover.
6. Remove driver knee bolster (reinforcement).
7. Loosen the inflator module fixing bolt from behind the steering wheel assembly using a TORX(R) driver or equivalent until the inflator module
can be released from steering assembly.