honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Air Mix Control Motor|Page 5261 > < Air Mix Control Motor|Page 5259
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Rear Mode Control Motor

Rear Mode Control Motor Replacement

Heating and Air Conditioning System

1. Remove the driver's seat.
2. Remove the center console.

3. Disconnect the 7P connector (A) from the rear mode control motor (B). Remove the self-tapping screws and the rear mode control motor from the

rear heater-A/C unit.

4. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make

sure the motor runs smoothly.

Climate Control System

1. Remove the center console.

2. Disconnect the 7P connector (A) from the rear mode control motor (B). Remove the rod (C) of the rear mode control motor from the rear mode

control linkage (D). Remove the self-tapping screws and the rear mode control motor from the rear heater-A/C unit.

3. Install the motor in the reverse order of removal. After installation, make sure the motor runs smoothly.

Air Mix Control Motor|Page 5261 > < Air Mix Control Motor|Page 5259