Pilot 2WD V6-3.5L (2006)
4. Pull out the front door opening trim (A) from the trim hooks (B) and around the front door opening flange, then remove the trim.
5. Detach the tabs (A) and hook (B) from the B-pillar lower trim (C) and rear side trim panel (D), and pull the rear door sill trim (E) up by hand to
detach the clips (F), then remove it.
6. Pull the rear side outer trim (G) by hand to detach the clips, then remove it.
7. Pull out the rear door opening trim (A) from the trim hooks (B) and around the rear door opening flange, then remove the trim.
8. Install the trim in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips and hooks into place securely.
