Pilot 4WD V6-3.5L (2008)
3. Remove the brake hose bracket mounting bolts (A) from the trailing arm.
4. Remove the brake hose bracket mounting bolts (A) from the knuckle.
5. Remove the brake caliper mounting bolts (B), then remove the caliper assembly (C) from the knuckle. To prevent damage to the caliper assembly
or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage. Do not twist the brake hose excessively.
6. Remove the wheel sensor (A) and sensor harness from the knuckle (B). Do not disconnect the wheel sensor connector.
7. Raise the stake (A) of the spindle nut (B), then remove and discard the nut.
