Prelude L4-1829cc 1800 ES,ET (1983)
22.
Clean the flusher using the procedure under TOOL MAINTENANCE.
TOOL MAINTENANCE
1.
Fill the tank with water and pressurize it.
2.
Depress the trigger and flush the discharge hose. If the discharged water does not foam, then the orifice is blocked.
3.
Clean the blocked orifice by disconnecting the plumbing from the tank at the large coupling nut.
4.
Remove the in-line filter from the discharge side and clean if necessary.
5.
The fluid orifice is located behind the filter:
clear it with the pick (screwed into the bottom of the tank handle) or blow with air.
6.
Securely reassemble all removed parts.
WARRANTY CLAIM INFORMATION
This bulletin covers technical procedures only. The flat rate time is included in the operations for automatic transmission replacement, overhaul. and
exchange. The 1988-89 Flat Rate Manual reflects this change.
