Prelude L4-22L SOHC (1994) Engine | Cylinder Block Assembly | Balance Shaft Disassembly
Oil Pump
9. Apply liquid gasket to the block mating surface of the oil pump, then install it on the engine block. Torque the 6 x 1.0 mm bolts to 12 Nm (1.2
kg-m, 9 lb ft).
-
Apply grease to the lips of the oil pump seal and the balancer seal.
Then, install the oil pump inner rotor onto the crankshaft. When the pump is in place, clean any excess grease off the crankshaft and the
balancer shaft, then check that the oil seal lips are not distorted.
Oil Pump And Screen Installation
10. Install the baffle plate, then install the oil screen. Torque the 6 x 1.0 mm bolts to 12 Nm (1.2 kg-m, 9 lb ft).