Ridgeline V6-3.5L (2006)
Driver/Vehicle Information Display: Testing and Inspection
Control Unit Input Test
NOTE: Before troubleshooting the safety indicator system, troubleshoot the multiplex integrated control system first using B-CAN System Diagnosis
Test Mode A.
Multiplex Integrated Control Unit
1. Turn the ignition switch OFF.
2. Remove the left kick panel.
3. Disconnect the under-dash fuse/relay box connectors E, H and Q.
4. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 5.
5. Reconnect the connectors to the under-dash fuse/relay box. Turn the ignition switch ON (II) and make these input tests at the appropriate