S2000 L4-2.2L (2004)
Timing Chain: Service and Repair
Timing Chain Installation
Timing Chain Installation
Special Tools Required
-
Holder handle 07JAB-001020A
-
Holder attachment, 50 mm 07JAB-001040A
-
Socket, 19 mm 07JAA-001020A or a commercially available 19 mm socket
1. Set the crankshaft sprocket so that the No.1 piston is at Top Dead Center (TDC). Align the key (A) on the sprocket and crankshaft with the pointer
(B) on the cylinder block.
2. Install the timing chain with the colored piece (A) aligned with the punch mark (B) on the crankshaft sprocket.