S2000 L4-2.2L (2004)
3. Install the oil pump chain guide.
4. Remove old liquid gasket from the chain case mating surfaces, bolts and bolt holes.
5. Clean and dry the chain case mating surfaces.
6. Apply liquid gasket, part No. 08718-0009, evenly to the cylinder block mating surface of the chain case and to the inner threads of the bolt holes.
NOTE: Do not install the parts if five minutes or more have elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing
old residue.
7. Install the dowel pins (A) and chain case (B) using a new O-ring (C).
8. Remove old liquid gasket from the oil pan mating surfaces, bolts and bolt holes.
9. Clean and dry the oil pan mating surfaces.