S2000 L4-2.2L (2004)
10. Apply liquid gasket, part No. 08718-0009, evenly to the cylinder block mating surface of the oil pan and to the inner threads of the bolt holes.
Install the oil pan.
NOTE: Do not install the parts if five minutes or more have elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing
old residue.
11. Tighten the bolts in two or three steps. In the final step, tighten all bolts, in sequence, to 12 Nm (1.2 kgf-m, 8.7 ft. lbs.).
12. Clean the bolt (A), washer (B), pulley (C) and crankshaft (D). Lubricate.