H2 V8-6.2L (2008)
1. Starting at the top center of the door opening, install the weatherstrip (2) to the pinch-weld flange (1) and work down the right and left sides
towards the bottom center, being careful not to stretch the weatherstrip during installation.
2. Use a rubber mallet to ensure proper seating of the weatherstrip on the pinch-weld flange.
3. Close the door.
Front Side Door Upper Auxiliary Weatherstrip Replacement
Front Side Door Upper Auxiliary Weatherstrip Replacement
Removal Procedure
1. Open both front and rear side doors.
2. Remove the weatherstrip (2) by pulling the weatherstrip off of the pinch-weld flange (1).
Installation Procedure
1. Starting at the center of the door openings, install the weatherstrip (2) to the pinch-weld flange (1) and work across the right and left sides towards
the ends of the weatherstrip, being careful not to stretch the weatherstrip during installation.
2. Close the door.
Front Side Door Weatherstrip Replacement
Front Side Door Weatherstrip Replacement
Removal Procedure