H2 V8-6.2L (2008)
Front Door Exterior Handle: Service and Repair
Front Side Door Outside Handle Replacement
Removal Procedure
1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement (See: Front Door Panel/Service and Repair/Front Side Door Trim
Panel Replacement) .
2. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement (See: Front Door Panel/Service and Repair/Front Side Door
Water Deflector Replacement) .
3. Remove the window. Refer to Front Side Door Window Replacement (See: Front Door Window Glass/Service and Repair/Front Side Door
Window Replacement) .
4. Disconnect the outside door handle rod (1) by releasing the retaining clip (2).
5. Disconnect the lock cylinder rod (1) by releasing the retainer clip.
6. Apply a piece of masking tape across the door handle, on the outside of the door, to secure the handle while removing the fasteners.
7. Remove the 3 nuts (1) retaining the door handle.
8. Remove the door handle.
Installation Procedure
1. Position the door handle in place on the door.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .