H2 V8-6.2L (2008)
4. Connect the park brake release cable to the park brake lever.
5. Connect the park brake warning lamp connector.
6. Install the MID-Bussed Electrical Center bracket.
7. Install the left side hinge pillar panel. Refer to Body Hinge Pillar Trim Panel Replacement - Left Side (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Body Hinge Pillar Trim Panel Replacement - Left Side) .
8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair/Battery Negative Cable Disconnection and Connection) .
9. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling (See: Parking Brake Cable/Service and
Repair/Procedures/Parking Brake Cable Adjuster Enabling) .