H2 V8-6.2L (2008)
Parking Brake Actuator: Service and Repair
Parking Brake Actuator Replacement
Caution: Refer to Brake Dust Caution (See: Service Precautions/Technician Safety Information/Brake Dust Caution) .
Removal Procedure
1. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling (See: Parking Brake Cable/Service and
Repair/Procedures/Parking Brake Cable Adjuster Disabling)
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance) .
3. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair)
.
4. Remove the rotor. Refer to Rear Brake Rotor Replacement (See: Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Rear Brake Rotor Replacement) .
5. Remove the axle shaft. Refer to Rear Axle Shaft Replacement (See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Axle Shaft/Service and Repair) .
6. Remove the park brake shoe. Refer to Parking Brake Shoe Replacement (See: Parking Brake Shoe/Service and Repair) .
7. Remove the actuator (2) and rubber boot (1).
Installation Procedure
