H2 V8-6.2L (2008)
Compressor/Pump: Service and Repair
Compressor Assembly Automatic Level Control Air Replacement (Dual Compressors)
Compressor Assembly Automatic Level Control Air Replacement (Dual Compressors)
Removal Procedure
Caution: Do NOT remove an air supply pipe in an attempt to depressurize the air suspension. Always follow the Air Suspension Depressurization
Procedure in Air Suspension. Failure to follow this procedure may cause personal injury or damage to the vehicle.
1. Depressurize the air suspension system. Refer to Air Suspension Depressurization (See: Service and Repair/Procedures/Air Suspension
Depressurization) .
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance) .
3. Support the compressor assembly with a suitable stand.
4. Remove the connector position assurance (CPA) retainer (3).
5. Disconnect the air inflator switch and air spring compressor electrical connectors (1, 2).
