H2 V8-6.2L (2008)
Compressor/Pump: Service and Repair
Isolator Compressor Automatic Level Control Air Replacement (Dual Compressors)
Isolator Compressor Automatic Level Control Air Replacement (Dual Compressors)
Removal Procedure
Caution: Do NOT remove an air supply pipe in an attempt to depressurize the air suspension. Always follow the Air Suspension Depressurization
Procedure in Air Suspension. Failure to follow this procedure may cause personal injury or damage to the vehicle.
1. Remove the compressor assembly from the vehicle and place on a bench. Refer to Compressor Assembly Automatic Level Control Air
Replacement (Dual Compressors) (See: Compressor Assembly Automatic Level Control Air Replacement (Dual Compressors)) .
2. Remove the mounting nuts (1).
3. Remove the mounting bolts (2).
4. Remove the isolators (3).
Installation Procedure