H3 L5-3.7L (2007)
6. Remove the black negative wire (3).
7. Remove the red positive wire (4).
8. Remove the mounting bolts (1).
9. Remove the brake booster pump (2).
Important: DO NOT reuse the retainer ring. Replace with a NEW retainer ring.
10. Remove the retainer ring (3) for the mounting bracket (4) by breaking the retaining ring (3) for the damper (5).
11. Remove the mounting bracket (4).
12. If damaged, replace the dampers (3, 6).
Installation Procedure
1. Install the mounting bracket (4) on the hydraulic booster pump (2).
2. Install the damper (5).
