Accent L4-1.6L (2003)
1. Clean the gasket surfaces of the coolant pump body and the cylinder block.
2. Install a new coolant pump gasket to the coolant pump and tighten the bolts to the specified torque.
Tightening torque
Coolant pump to cylinder block:
A: 12 - 15 Nm (120 - 150 kg-cm, 9 - 11 ft. lbs.)
B: 20 - 27 Nm (200 - 270 kg-cm, 15 - 20 ft. lbs.)
3. Install the timing tensioner and timing belt. Adjust the timing belt tension.
4. Install the timing belt covers.
5. Install the coolant pump pulley and drive belt, and then adjust the belt tension.
6. Refill the system with clean coolant.
7. Run the engine and check for leaks.
