Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
CAUTION: Do not reuse the bearing removed from the shaft.
4. Drive out the lock pin from the hole A using a punch.
5. Drive out the pinion shaft.
6. Remove the pinion gears, washers, side gears and spacers.
ASSEMBLY
1. Install the spacer on the back of the side gear and then install the gear in the differential case.
CAUTION: When installing a new side gear, use a spacer of medium thickness [0.93-1.00 mm (0.0366-0.0394 inch)].
2. Set the washer on the back of each pinion and insert the two pinions to specified position while engaging them with the side gears by turning them.
3. Inset the pinion shaft.
