Accent L L4-1495cc 1.5L SOHC MFI (2001)
25. Install the bellows in position, taking care not to twist it.
26. Fill the dust cover inner side and lip with the specified multipurpose grease, and place the dust cover in position with the clip ring attached in the
groove of the tie rod end.
27. Install the tie rods so that the length of the left and right tie rods are equal.
Tie rod length (standard value): 185.2 ± 1 mm (7.3 ± 0.04 inch)
28. Confirm the pinion preload.
INSTALLATION
1. Install with the projection on the mounting rubber of the gear housing aligned with the holes in the clamp and gear housing bracket.
2. Apply adhesive to the cylinder side mounting rubber so that its slitted part will not open.
3. Check that there are no oil leaks.
4. Confirm the steering wheel rotates smoothly.
5. Adjust the toe-in.
6. Install all parts with reference to the torque specification.
