hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Brake Rotor - Surface Rust Noise & Pedal Pulsation.|Page 6799 > < Brake Rotor - Surface Rust Noise & Pedal Pulsation.|Page 6797
Page 1
background image

Brake Rotor/Disc: Service and Repair

REMOVAL

1. Remove the lower bolt and lift the caliper assembly up and out of the way. Secure it with a wire or some other retaining method.
2. Remove the pads.

CAUTION:  Do not depress the brake pedal while disassembling the pads.

INSPECTION

1. Check the pads for wear or oil contamination and replace, if necessary.

CAUTION:  The pads for the right and left wheels should be replaced at the same time. Never "split" or intermix brake pad sets. All four pads
must be replaced as a complete set.

Brake Rotor - Surface Rust Noise & Pedal Pulsation.|Page 6799 > < Brake Rotor - Surface Rust Noise & Pedal Pulsation.|Page 6797