Santa Fe L4-2.4L (2001)
Harmonic Balancer - Crankshaft Pulley: Technical Service Bulletins
Engine - Crankshaft Bolt Torque Revision
Group
20 - ENGINE MECHANICAL
Number
03-20-002
Date
06-2003
Model
SANTA FE 2001-2003 AND SONATA 1989-2003
Subject
2.4L CRANKSHAFT DAMPER MOUNTING BOLT:
TORQUE SPECIFICATION CHANGE
DESCRIPTION:
The torque specification for the 2.4L engine crankshaft damper mounting bolt in Santa Fe and Sonata vehicles has changed.
The new torque specification is:
116-123 lb.ft (157-167 N-m)
Please correct the 1999-later Sonata Shop Manuals and all Santa Fe Shop Manuals.
2.4L engines built on or after May 28, 2002 are torqued to the new value from the factory.
Engines built prior to May 28, 2002 can be torqued to the new value without replacing* the bolt.
The part number did not change (P/N 23127-38000).
* =
Before re-using a crankshaft damper mounting bolt, inspect the bolt for pitting, corrosion and damaged threads. Replace the bolt if there is any
question to the condition of the bolt.
