Santa Fe L4-2.4L (2001)
9.
The boot program will download first, next the main program and then the interrupt vector program.
NOTE:
An error message may appear after the Boot Program is downloaded. The Hi-Scan will automatically retry the download process. It is not necessary
to do anything at this time.
WARNING:
Do not interrupt the reprogramming at any time. The ECM and/or the TCM may be rendered inoperative if the program does not download
completely.
10.
Hi-Scan re-initializes the system.
11.
When the "ECM COMPLETED" message is displayed, the ECM reprogramming process is finished.
12.
It vehicle is equipped with an automatic transaxle, disconnect the RED 10-pin connector from the Hi-Scan Reprogramming Adapter and the
