Santa Fe L4-2.4L (2001)
b. Put matchmarks on the mating parts with a scriber.
NOTE Note the positions of balls so that they can be reinstalled in their original positions.
c. Remove the D.O.J. assembly from the front propeller shaft with a commercially available puller.
7. REMOVAL OF D.O.J. BOOT
When reusing the D.O.J. boot, apply adhesive tape to the splined section of the propeller shaft before removing.
INSPECTION
1. Check the propeller shaft splines for wear or damage.
2. Check the ball grooves in the inner and outer races for uneven wear, damage or rust.
3. Check the ball surfaces for rust, wear or damage.
4. Check the cage for rust or damage.