Santa Fe FWD L4-2.4L (2010)
Power Steering Pump: Overhaul
Disassembly
Disassembly
CAUTION:
Following information is disassembling procedure for the power steering pump installed to 2.7L engine. Do not disassemble the power steering pump
assembly installed to 3.3L engine. When the pump is out of order replace the power steering pump assembly.
1. Remove two bolts from the oil pump body (A), and then remove the suction pipe (B) and O-ring.
2. Loosen the four bolts and remove the oil pump cover assembly (A) and the gasket.
3. Remove the rotor and vanes.
4. Remove the cam ring.