Santa Fe FWD V6-3.3L (2009)
6. Remove the side cover.
7. Loosen the drain plug(A) and drain the engine coolant.
8. Drain the engine oil.
9. Remove the surge tank.
(1) Disconnect the RH oxygen sensor connector (A).
(2) Disconnect the RH injector connector (A), ignition coil connector (B) and VIS connector (C).
(3) Disconnect the PCSV connector (A), MAP sensor connector (B), PCSV hose and the ECM vacuum hose.
(4) Disconnect the ETC connector (A) and knock sensor connector (B).
