Santa Fe FWD V6-3.3L (2009)
AUTOMATIC REPROGRAMMING PROCEDURE:
IMPORTANT:
You should always perform a GDS ECM update by Auto Mode as it has error checking to ensure the correct data is flashed in the vehicle. Do not use
Manual Mode unless you experience a failure during the reflash process and need to reflash again, but it is essential under this condition the correct
ECM is selected for the vehicle, or else it may not run.
1. Enter the vehicle information either automatically by pressing the VIN Auto Detect button or if it does not work then manually enter the vehicle
model, model year, and select ENGINE as the system:
2. Select ECU Upgrade:
