Santa Fe FWD V6-3.3L (2009)
8. Install the clip to the PTJ case (B).
9. Add the specified grease to the PTJ as mush as wiped away at inspection.
10. Install the PTJ boots.
11. Install the bands to both PTJ boots.
12. Using the SST(09495-3K000), secure the boot bands.
Clearance (A): 2.0 mm (0.079 in.) or less
13. To control the air in the PTJ boot, keep the specified distance between the boot bands when they are tightened.
Rear Driveshaft
Inspection