Santa Fe FWD V6-3.3L (2009)
4. Using the SST(09495-3K000), secure the boot bands.
Clearance (A): 2.0 mm (0.079 in.) or less
5. To reassemble the dynamic damper (A), keeping the shaft (B) in the straight, tighten the dynamic damper (A) with dynamic damper band (C), as
the illustration.
6. Install the PTJ boot bands and PTJ boot.
7. Install the trunion assembly (A) and the circlip (E) to the spline (C) on the driveshaft.
At this time align the marks (D) each other.
