hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Engine - Stalls On Initial cold Start|Page 1385 > < Engine - Stalls On Initial cold Start|Page 1383
Page 6
background image

INSTALLATION LAY-OUT

NOTE:

Installation of extension harness, attach end with red tape to the ECU.

SERVICE PROCEDURE:

1.

Disconnect the ground cable from the battery.

2.

Remove the right hand front door scuff trim.

3.

Remove the lower crash pad under cover.
(non-passive restraint vehicles only).

Engine - Stalls On Initial cold Start|Page 1385 > < Engine - Stalls On Initial cold Start|Page 1383