hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Airbags - Replacement After A Collision|Page 263 > < Airbags - Replacement After A Collision|Page 261
Page 3
background image

^

Then, carefully use a curved trim tool to pop out the side tabs and lift it out of place. Disconnect the accessory power outlet connector.

5.

The SRS CM can now be seen below the console.

6.

Remove the connector from the module.

NOTE:  It may be difficult to push in the release while pulling up on the locking arm.

Airbags - Replacement After A Collision|Page 263 > < Airbags - Replacement After A Collision|Page 261