Sonata GLS V6-2.5L (2000)
2. Check the pad thickness through the cylinder inspection hole. If the pad lining thickness is out of specification, replace the pads.
3. Remove two bolts from the torque plate and remove the brake cylinder.
4. Remove the brake cylinder and suspend it with a wire.
NOTE: Do not disconnect the brake hose.
5. Remove the pads.
CAUTION: Be careful not to depress the brake pedal while disassembling the pads.
INSPECTION
1. Check the pads for wear or oil contamination. Replace or correct if necessary.
2. Check the shims for damaged or deformed.
INSTALLATION