Tiburon L4-2.0L (1999)
Fluid - M/T: Testing and Inspection
TRANSAXLE GEAR OIL LEVEL INSPECTION
Inspect each component for evidence of leakage. Check the gear oil level by removing the filler plug. If the oil is contaminated, it is necessary to
replace it with new oil.
1. Remove oil filler plug and check oil level with finger.
2. Oil level must be up to fill hole. If it is below hole, add oil until it runs out, then reinstall plug.
3. Replace the oil that the transaxle gear oil is noticeably dirty, and that it is not of a suitable viscosity.
