Tucson V6-2.7L (2005)
operation of the vehicle.
WARNING:
If automatic reprogramming is interrupted, the manual reprogramming procedure must be used.
HI-SCAN PRO INSTALLATION PROCEDURE:
1.
Remove the system software card from the Hi-Scan Pro and insert the blue 32MB reprogramming software card with the new TCM program into
the Hi-Scan Pro top slot.
2.
Connect the reprogramming adapter (SPX P/N J-44410-RPRG ADPT) to the Hi-Scan Pro.
3.
Connect the reprogramming adaptor to the 20-pin DLC adaptor. Connect the battery power clips to the cigarette lighter adaptor.
4.
Connect the battery power clips (SPX P/N 09900-27210) to the vehicle's battery.