Tucson AWD L4-2.0L (2007)
Pictures of the CHMSL bracket and the adhesive.
Use of 3M Adhesive, item number, DP810NS, 50 ML and locally available alcohol wipes to clean the surface is recommended.
Similar products, such as the Loctite product listed below may also be used.
NOTE:
3M Automotive Aftermarket Division products can be located at www.3m.com/product/business-units/automotive-aftermarket. html. An
applicator and a mixing nozzle, such as 3M(TM) Scotch-Weld(TM) EPX(TM) Plus II, item number 62-9170-9930-1 is required.
NOTE:
Loctite Locquic 736 Primer and SpeedBonder 324 Adhesive may be substituted. This product does not require an applicator. Loctite products
can be located at www.loctite.us.
NOTE:
If the CHMSL requires replacement, it will also need to be ordered.
PROCEDURE:
