Veracruz FWD V6-3.8L (2009)
2. Connect the rear shock absorber (C) with the carrier assembly and then tighten the nut (B).
Tightening torque :
100 - 120N.m (10.0 - 12.0kgf.m, 72 - 87lb-ft)
3. Adjust height of the jack to place the bolt (A) holding rear shock absorber (C) and body through the mating holes and then tighten the bolt (A).
Tightening torque :
140 - 160N.m (14.0 - 16.0kgf.m, 101 - 116lb-ft)
4. Install the rear wheel & tire.
Tightening torque :
90 - 110N.m (9.0 - 11.0kgf.m, 65 - 80lb-ft)
Shock Absorbers
Components