Veracruz FWD V6-3.8L (2009)
Suspension Strut / Shock Absorber: Overhaul
Disassembly
Disassembly
1. Compress the coil spring with a SST (09546-26000). Do not compress the spring more than necessary.
2. Remove the insulator cap (A) and then loosen the self-locking nut.
3. Disassemble the components of front strut assembly in sequence.
Inspection
Inspection
1. Check the components for damage or deformation.
2. Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during operation.
Reassembly
Reassembly
1. Install the front shock absorber to SST (09546-26000).
2. Assemble the components of the front strut assembly in sequence.
3. After seating the upper and lower ends of the coil spring in the upper and lower spring seat grooves correctly, tighten new self-locking nut.
Tightening torque :
60 - 70N.m (6.0 - 7.0kgf.m, 43 - 51lb-ft)
4. Install the insulator cap.
5. Remove the special service tool.
