Veracruz FWD V6-3.8L (2009)
4. Check the CV joint boot (B) for damage and deterioration. If the boot is damaged or deteriorated, replace the propeller shaft assembly.
5. Check the CV joint (C) for excessive play or rattle. If the CV joint have excessive play or rattle, replace the propeller shaft assembly.
Propeller Shaft Runout
1. Install a dial indicator with its needle on the center of front propeller shaft or rear propeller shaft.
2. Turn the propeller shaft slowly and check the runout. Repeat this procedure for the other propeller shaft.
Front Propeller Shaft Runout: 0.3mm (0.012in.)
Rear Propeller Shaft Runout: 0.3mm (0.012in.)
3. If the runout on either propeller shaft exceeds the service limit, replace the propeller shaft assembly.