FX35 RWD V6-3.5L (VQ35HR) (2010)
1: AV control unit
DISASSEMBLY
Without Navigation
AV CONTROL UNIT
Removal and Installation
CAUTION:
Before replacing AV control unit, perform "READ CONFIGURATION" to save or print current vehicle specification. For details, See:
Testing and Inspection/Programming and Relearning/Additional Service When Replacing AV Control Unit/Description/Without Navigation
See: Testing and Inspection/Programming and Relearning/Additional Service When Replacing AV Control Unit/Work Procedure/Without
Navigation See: Testing and Inspection/Programming and Relearning/Configuration (AV Control Unit)/Description/Without Navigation,
"ADDITIONAL SERVICE WHEN REPLACING AV CONTROL
UNIT : Description".
REMOVAL
1. Remove front display unit. See: Collision Avoidance and Parking Assist Systems/Exterior View Display Monitor/Service and Repair/Exploded
View/Without Navigation.
2. Remove AV control unit with a unified meter and A/C amp. as a single unit from the body.
3. Remove bracket screws, and then remove AV control unit.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
-
Since AV control unit connector and unified meter and A/C amp. connector have the same form, be careful not to insert them wrongly.
-
Be sure to perform "WRITE CONFIGURATION" when replacing AV control unit.
Navigation (Single Monitor)