FX35 RWD V6-3.5L (VQ35HR) (2010)
/Page-1653002.png)
8. While pulling outside handle (1), slide toward rear of vehicle to remove outside handle.
9. Remove front gasket and rear gasket.
10. Slide toward rear of vehicle to remove outside handle bracket.
11. Disconnect door lock cable from outside handle bracket.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
When installing key rod, rotate key rod holder until a click is felt.
-
Check door lock cable is properly engaged with outside handle bracket.
-
After installation, check door open/close, lock/unlock operation.
