FX35 RWD V6-3.5L (VQ35HR) (2010)
Steering Angle Sensor: Service and Repair
Removal and Installation
STEERING ANGLE SENSOR
Removal and Installation
REMOVAL
1. Remove spiral cable assembly. See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Exploded View.
2. Remove steering angle sensor from spiral cable assembly.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
Never reuse steering angle sensor.
-
When installing steering angle sensor, tighten it to the specified torque with an electric screwdriver. Be sure to tighten it completely with no
floating and tilting.
-
After work, make sure to adjust neutral position of steering angle sensor. See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Testing and Inspection/Programming and Relearning/Adjustment Of Steering Angle Sensor Neutral Position/Description.