FX35 RWD V6-3.5L (VQ35HR) (2010)
Ride Height Sensor: Service and Repair
Front Wheel Vertical G Sensor
Exploded View
FRONT WHEEL VERTICAL G SENSOR
Exploded View
NOTE:
The above figure shows left side. Right side is the mirror image.
Removal and Installation
FRONT WHEEL VERTICAL G SENSOR
Removal and Installation
REMOVAL
1. Turn the ignition switch OFF.
2. Remove the air cleaner case. See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Air
Cleaner Fresh Air Duct/Hose/Service and Repair/Exploded View.
3. Disconnect the front wheel vertical G sensor connector.
4. Remove the front tire.
5. Remove the bracket mounting bolts.
6. Remove the front wheel vertical G sensor mounting nut.
7. Remove the front wheel vertical G sensor from front strut.
INSTALLATION
Install in the reverse order of removal.